Atlantic Series® Front Loader

Description

Rugged. Reliable. Resilient. When you want a front loader that will get you the most for your money, you want the McNeilus Atlantic Series Front Loader.® Productive and heavy duty, it’s built to take on your toughest routes.

The Atlantic also exhibits McNeilus’ standard for superior technology with CAN-based controls that offer convenience for the operator and maintenance personnel, alike. The system features sealed keypads, backlit screens, vehicle status lights and unmatched diagnostics capability, all while providing reliable performance backed by our experience in CAN-based systems.

With other features such as McNeilus’ Excalibre™ cylinders that help prevent hydraulic contamination, AR450 abrasion resistant steel and arms rated to lift up to 10,000 pounds, this truck doesn’t quit!

Specifications
PERFORMANCE SPECIFICATIONS*

Arms Down IDLE: 11 seconds

1350 RPM: 6 seconds
Arms Up IDLE: 10 seconds

1350 RPM: 6 seconds
Forks Down IDLE: 4 seconds

1350 RPM: 3 seconds
Forks Up IDLE: 3 seconds

1350 RPM: 3 seconds
Packer Extended IDLE: N/A

1350 RPM: 20 seconds
Packer Retract IDLE: N/A

1350 RPM: 9 seconds
Seal Height 50"
Compaction Force = 118,800
Ejector Extend IDLE: 28 seconds

1350 RPM: N/A
Ejector Retract IDLE: 10 seconds

1350 RPM: N/A
Top Door Open IDLE: 8 seconds

1350 RPM: 7 seconds
Top door Close IDLE: 7 seconds1350 RPM: 6 seconds
Tailgate Open IDLE: 28 seconds1350 RPM: N/A
Taligate Close IDLE: 31 seconds1350 RPM: N/A
* Cycle times may vary slightly

ARM ASSEMBLY

Arm Side Plate 1/4" grade 80
Arm Construction Internal reinforcement
FORKS
Fork Construction A36, 1.5" x 60"

HOPPER SPECIFICATIONS

Hopper Capacity 12 cubic yards
Hopper Floor 1/4" AR400
Upper Hopper Sides 3/16" AR200
Lower Hopper Sides 3/16" AR400
Hopper Width 84"

PACKER/EJECTOR SPECIFICATIONS

Lower Face Plate 5/16" AR200
Upper Face Plate 3/16" AR200
Packing Panel Floor Tracks 3/8" grade 50 high-strength steel
Top and Side Wear Strips 1/4" AR400
Bottom Wear Strips 1/4" X-wear

BODY SPECIFICATIONS

Body Floor 3/16" AR200
Body Roof 10-gauge AR200
Body Side Walls 1/8" AR450

TAILGATE SPECIFICATIONS

Tailgate Rear and Side Walls 1/8" AR450
Eight-Point Automatic Locking Tailgate

OPERATIONS

Command ZoneTM multiplex and distributed CAN-based controls offering the best technology in the business - sealed keypads, backlit screens, operator status lights and diagnostic display.
Air or Rabbit Ear Joysticks

HYDRAULICS

Pump Vane or Gear with Pack-on-the-go flow control system
Control Valves Parker VA35, MRV setting- 2500 psi
Oil Reservoir Capacity 50 gallons
Return Filter 5 micron
Suction Strainer 100 mesh stainless steel with magnets

CYLINDERS

Ejector Cylinder (36-40 yd) 6-1/4" 3-stage 164"(43-45 yd) 6-1/4" 3-stage 181"
Arm Cylinder 4-1/2" bore x 2-1/2" rod x 46" stroke
Fork Cylinder 3-1/2" bore x 2" rod x 26" stroke
Tailgate Cylinder 3-1/4" bore x 2" rod x 38" stroke

PAINTING

Packer and components steel shot blasted prior to priming with high solids epoxy primer.
Finish coat Akzo Coating's Sikkens high solids acrylic urethane.