M/A Manual/Automated Side Loader

Description

Collection routes can be unpredictable when it comes to what’s sitting next to the curb. The McNeilus Manual/Automated (MA) Side Loader takes out some of the guesswork with an automated arm plus a manual loading mechanism that makes it the most flexible refuse truck on the market.

The simple-to-operate arm handles residential cans efficiently. The low height hopper sill also allows the operator to manually throw in the “little extras” that often come with residential trash collection routes. And, an optional cart tipper lets you collect from both sides of the street.

MANUAL/AUTOMATED SPECS-PERFOMANCE SHEET>> DOWNLOAD

This versatile vehicle can also be ordered without the arm as a strictly manual side loader. The drop frame and lower hopper sill make it ideal for single-man routes or recycling routes, allowing the operator to easily and efficiently dump totes.

Specifications
BODY SPECIFICATIONS

Floor 10-gauge AR200
Roof 11-gauge AR200
Side Walls 11-gauge AR200

TAILGATE

Tailgate Side and Rear Walls 1/8" AR450
HOPPER
Hopper Floor 3/16" GRD 50
Wear Area 1/4" AR Hardox 400
Hopper Assist Panel 3/16" AR200

PACKER

Packing Face 1/4" AR200
Wear Strips X-Wear and AR400
Follower Panel 3/16" AR200

ARM

Grabber Ground Clearance 10"
Arm Reach 6'

CHASSIS REQUIREMENTS*

GAWR 18,000 lb Min front, 40,000 lb Min rear
After Frame 60" min
*Guidelines only. Contact McNeilus at 888-686-7278. for specific chassis requirements before ordering.

HYDRAULICS

Pump Make/Model Parker P350 tandem pump with HOC and Pack-on-the-go flow control system
Control Valves Parker VA35
Packer Valve VA35 x 2 work sections — pneumatic operating with pre-coalescing filter
Arm Valve Parker P70 x 5 work sections — electric proportional coils
Oil Reservoir 50 gallons
Filter 1 Parker 100 mesh suction filter
Parker 16 micron medium-pressure return line
Pack at idle capacity

CYLINDERS

Packer 4" bore x 3" rod x 39-1/2" stroke
Arm In/Out 2" bore x 1-1/4" rod x 67" stroke
Grabber 2" bore x 1" rod x 6-1/4" stroke
Tailgate 2-1/2" bore x 1-1/2" rod x 38" stroke
Body Lift (telescoping) 6-1/2" bore x 3-1/2" rod (3rd stage) x 170" stroke
Hopper Assist 3" bore x 2" rod x 14" stroke

HARDWARE

Weather Pak and Deutsch connectors
Aeroquip hoses and fittings
Hydra-Zorb™ and Stauff clamps
Zinc-dichromate coated hydraulic lines

PERFORMANCE

8 – 18 second dump cycle depending on reach requirement

CONTAINER CAPACITY*

30 – 100 gal
*Cycle times vary depending on oil temperature, engine idle setting, equipment wear, etc.

PAINTING

Packer steel shot-blasted prior to priming with Akzo Coating's high-solids epoxy primer and acrylic urethane