ZR™ Side Loader

Description

There can be a lot of obstacles to handle on a daily collection route: narrow streets and alleyways, clearance issues around containers. Get over these hurdles with the McNeilus Zero Radius™ Automated Side Loader.

This advanced refuse truck offers an innovative, yet simple, zero radius operation. The arm reaches rather than swings out, so you don’t need a wide clearance to grab cans. With optional 12-foot extended reach, it’s even easier to navigate cul-de-sacs and obstructions such as parked cars. This field-proven arm can also handle some of the densest routes.

ZERO RADIUS SPECS-PERFOMANCE SHEET>> DOWNLOAD

Other advances include the McNeilus CODE system. These simplified CAN-based controls provide complete vehicle diagnostics at your fingertips. Plus, there’s an integrated smart fuse panel, reduced hardware requirements, pre-trip reminders, status messages and more!

Specifications
PERFORMANCE AND OPERATIONS

Arm Out 2.5 seconds
Arm In 2.5 seconds
Arm Up 3 seconds
Arm Down 3 seconds
Grabber Open 1.5 seconds
Grabber Close 1.5 seconds
Packer Cycle 16 seconds (+/- 10%)
Arm lifting capacity = 550 pounds
Arm reach = 6 feet (standard), 12 feet (optional)
Ejector Extend (to end of body) 27 seconds
Ejector Retract (to home position) 13 seconds
Top Door Up 1.5 seconds
Top Door Down 1.5 seconds
Tailgate Open 16 seconds
Tailgate Close 18 seconds

ARM ASSEMBLY

Arm Construction Tube Grade 500B Tube
Arm Style Zero Radius -- ideal for demanding commercial routes riddled with tight spaces and tough obstacles

HOPPER

Hopper Capacity (w/top door down) Largest in the industry at 4.8 useable cubic yards
Hopper Walls 3/16" AR400
Hopper Floor 1/4" AR400

PACKER/EJECTOR

Lower Packing Face 1/4" AR200
Packing Panel Follower 10-gauge Grade 50 high-strength steel
Track & Wear Strips Chromium Carbide X-wear

BODY SPECIFICATIONS

Body Floor 3/16" AR200
Body Walls AR450 and AR200
Roof 12-gauge GR50

TAILGATE

Tailgate Rear and Side Walls .125" AR450
Eight-point automatic locking tailgate

OPERATIONS

Command McNeilus CODE™ simplified CAN-based controls offer the best technology in the business. (smart fuse panel, complete diagnostics, vehicle status messages, pre-trip reminders and more!)
Electronic proportional controls

HYDRAULICS

Pump Piston Type: pressure-flow compensated, PTO-mounted
Control Valves Proportional Electric/Hydraulic
Oil Reservoir Capacity 50 gallons
Return Filter 5 micron-in tank
Suction Strainer 100 mesh stainless steel

CYLINDERS

Ejector Cylinder Multistage
Arm Cylinder Hydraulic Motor Driven
Tailgate Cylinder 25" x 38" stroke

PAINTING

Packer and components steel shot blasted prior to priming with high solids epoxy primer
Finish coat Akzo Coating's Sikkens high solids acrylic urethane