TB 110

Description

The TB 110 can place concrete at high volumes up to 360 yd³ (275m³) an hour and convey a wide variety of materials ranging from sand to 4" rock.

With its steel/aluminum truss and three aluminum sections, this four-section telescopic conveyor offers 106'1" (32.34m) of horizontal reach.

The unit can set up and operate under heights as low as 15' 9" (4.80m).

•  Easily and quickly clears obstacles.
• Places materials exactly where you want them.
• Eliminates the need for an all-wheel drive mixer truck, skid-steer loader, or other equipment.
• Ideal for mat pours, backfilling, tilt-up projects, bridge decks, and slab work.

Specification

Height & Reach
Number of sections     4
Conveyor horizontal reach: maximum at 0°     106' 1" (32.34m)
Conveyor horizontal reach: maximum at 30°     91' 6" (27.91m)
Conveyor belt width     18" (457mm)
Feed conveyor length     38' 0" (11.60m)
Feed conveyor belt width     18" (457mm)
Trunk/end hose length     15' 0" (4.57m)
Discharge height from grade: maximum at 30°     60' 2" (18.36m)
Discharge height from grade: maximum at -15°     -20' 0" (-6.11m)
Rated capacity at 0°: main and feed conveyors by minute     5.00 yd³/min (4.00m³/min)
Rated capacity up to 20°: main and feed conveyors by minute     3.80 yd³/min (2.90m³/min)
Observed capacity at 0°: main coveyor by minute     5.00 yd³/min (4.00m³/min)
Observed capacity at 20°: main coveyor by minute     5.00 yd³/min (4.00m³/min)

Outriggers

Net reach beyond outriggers: at 0°     100' 6" (30.65m)
Net reach beyond outriggers: at 30°     86' 0" (26.23m)
Outrigger spread L - R - front hydraulically rotate out and down     23' 1" (7.05m)
Outrigger spread L - R - rear hydraulically rotate out and down     26' 9" (8.17m)
Outrigger load: Front     30,350 lbf (135 kN)
Outrigger load: Rear     34,395 lbf (153 kN)

All specifications apply to units mounted on MACK MRU 613.
Weights are approximate and include conveyor truck, fuel, driver and 100 gal (379L) of water.
Truck dimensions will vary with different makes, models and specifications.
Maximum theoretical values listed.