TB 130
Description
Offering a 126'6" horizontal reach, the TB 130 features a five-section boom and a fully hydraulic conveyor capable of handling concrete slumps from 0" to 12" and materials from sand to 4" rock.
Strong yet lightweight and easy to control, the unit features quick setup using its patented outrigger design.
The TB 130 also operates in ceiling heights as low as 15' 4" (4.70m).
- Easily and quickly clears obstacles.
- Places materials exactly where you want them.
- Eliminates the need for an all-wheel drive mixer truck, skid-steer loader, or other equipment.
- Ideal for mat pours, backfilling, tilt-up projects, bridge decks, and slab work.
Specification
Height & Reach
Number of sections 5
Conveyor horizontal reach: maximum at 0° 126' 3" (38.47m)
Conveyor horizontal reach: maximum at 29° 110' 9" (33.74m)
Conveyor belt width 18" (457mm)
Feed conveyor length 38' 0" (11.60m)
Feed conveyor belt width 18" (457mm)
Trunk/end hose length 15' 0" (4.57m)
Discharge height from grade: maximum at 29° 68' 3" (20.81m)
Discharge height from grade: maximum at -15° -25' 10" (-7.86m)
Observed capacity at 0°: main coveyor by minute 5.00 yd³/min (4.00m³/min)
Observed capacity at 20°: main coveyor by minute 5.00 yd³/min (4.00m³/min)
Rotation-hydraulic 360°
Outriggers
Net reach beyond outriggers: at 0° 120' 9" (36.81m)
Net reach beyond outriggers: at 29° 105' 0" (31.99m)
Outrigger spread L - R - front hydraulically rotate out and down 27' 9" (8.46m)
Outrigger spread L - R - rear hydraulically rotate out and down 29' 0" (8.84m)
Outrigger load: Front 37,320 lbf (166 kN)
Outrigger load: Rear 45,190 lbf (201 kN)
All specifications apply to units mounted on MACK MRU 613.
Weights are approximate and include conveyor truck, fuel, driver and 100 gal (379L) of water.
Truck dimensions will vary with different makes, models and specifications.
Maximum theoretical values listed.