BSA 14000 HP-D 8

Description

The BSA 14000 HP-D 8" is a powerful pump with maximum volume at the greatest distances. It has maximum output of 133 cubic yards per hour at pressures up to 2,176 psi with 8-inch x 83-inch material cylinders to fit any job requirement.

Specifications:

Performance

Maximum theoretical output* - rod     133 yd³/hr (102m³/hr)
Maximum theoretical output* - piston     92 yd³/hr (70m³/hr)
Maximum theoretical pressure* - rod     2,176 psi (150 bar)
Maximum theoretical pressure*^ - piston     3,190 psi (220 bar)

Technical Information

Material cylinders     8" x 83" (200x2,100mm)
Variable volume     0 to full
Chromed cylinders     Standard
Hydraulic system     FFH-EL
Hydraulic system pressure     5,075 psi (350 bar)
Hydraulic cylinders     6.3" x 3.5" (160x90mm)
Outlet diameter     6" (150mm)
Maximum size aggregate     2.5" (63mm)

Valve & Hopper

S-Valve: S-2015D     8" to 6" (200 to 150mm)
Hopper model     RS 905HF
Hopper capacity     21.2 ft³ (600L)
Hopper height     51" (1,295mm)
Maximum strokes per minute - rod     26
Maximum strokes per minute - piston     18

Dimensions

Trailer type     Tandem axles
Length     264" (6,708mm)
Width     77" (1,950mm)
Height     117" (2,972mm)
Approximate weight     23,800 lbs (10,800kg)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.
^ Special equipment configurations required to operate on piston side.

Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.